Not known Details About Termite Control How Often

The Only Guide to Termite Control In Agriculture


Soil around sewer pipes and conduits and all other structural members in contact with the soil must be handled. The insecticide must be mixed with water as needed on the pesticide label and implemented at the rate of 4 gallons per 10 linear feet, per foot of depth. It's likely to trench around the exterior of a slab after it's been poured, but this alone generally will not offer termite control because the colony may be entering the structure from the ground under the slab.

In addition, concrete slabs normally have many other points of entry such toilet traps, plumping outlets, etc.. Slab construction asks a lot of time and labor when treating for termites. Slab construction often will call for exact drilling to block all termite entry points. Slabs must be drilled along all cracks and construction joints in 12-inch intervals and no more than 6 inches in the foundation.

This technique of drilling and treating is also used for dirt-filled porches and stress cracks sometimes found in slabs.Wood treatmentThis form of treatment involves applications of termiticides right to wood to eliminate existing termite infestations or to make the wood resistant to termites. There are numerous supplemental ways in which wood treatments are used in the pest control industry.Pressure-treated timber is frequently utilized in the construction of buildings and supplies effective termite control if it's used for wood construction, at least on the ceiling amount of the first floor.

Some Of Termite Control How Often


In damaged wood, termiticide can be injected into the cavities. This will provide better control than will a spray or brush application. Foundation treatment Foundation treatments involve the application of termiticides to foundation elements. The objective of this treatment is to produce a barrier by placing termiticides inside of concrete block/multiple brick walls where voids exist.

The Best Strategy To Use For Termite Control How OftenThe Termite Control How Often PDFs
Drilling and treating foundation elements allows termiticides to be placed on top of concrete footings where cracks may exist. In addition, where evidence of either past or present subterranean termite infestation is present, voids in multiple masonry foundation elements must be drilled and treated in a minimum distance of four feet in all directions from these evidence.

Termiticide baits control termites by eliminating or reducing the magnitude of the colony. They do not make a barrier around the structure, as do the insecticides discussed previously. Presently, termiticide baits are insect growth regulators (IGRs) or slow acting poisons. The use of termiticide baits can significantly reduce or eliminate the need for a conventional liquid insecticide.There are two strategies for the use of termiticide baits.

When termites are detected in the monitoring device, the untreated cellulose material is replaced with a treated material, known as a"termiticide bait". The lure material is replenished so long as termites continue feeding. For the lure system the correct number of stations have to be installed and the stations must be inspected or monitored regularly as indicated on the product label.

See This Report on Termite Control In Agriculture


As a variation of the strategy, devices might be pre-baited and placed in the soil in areas where termites are present. The second bait strategy currently in use involves the attachment of lure devices directly into the face of construction elements where termites are feeding. These devices are pre-baited and are connected to the foundation walls, floor joists, sub floor and other comparable locations.

There are advantages and disadvantages to the use of baits. Baits could be used in the treatment of structures that cannot be treated address due to the presence of a well, inaccessibility of infested regions or concerns about the use of pesticides. But, in the majority of circumstances baits do not offer control of the termite infestation.

The North Carolina Official Waiver of Minimum Requirements for the Control of Subterranean Termites in Existing Structures is a standard form prescribed by the NC Structural Pest Control Committee. This form enables the licensee to deviate from or omit one or more of the minimum subterranean treatment requirements. For example, a waiver may be necessary because the working clearance in the crawlspace is inadequate in order for it to be treated correctly, or a treatment demands indoor drilling that may not be desirable.

Indicators on Termite Control Home Treatment You Should Know


Any region of the treatment that is waived must be explained on the standard waiver form. The waiver form is not necessary for termite baits/monitoring systems so long as the pest control company provides a service agreement and/or warranty for the entire arrangement. Conclusion Remember the method for the control of subterranean termites is prevention.

Leave a Reply

Your email address will not be published. Required fields are marked *